Hot Connections Jewelry by Jennifer Chin

Author:Jennifer Chin [Chin, Jennifer]
Language: eng
Format: epub, pdf
ISBN: 978-0-8230-8228-5
Publisher: Crown Publishing Group
Published: 2011-08-30T16:00:00+00:00

2. Drill one hole in each disk about 2mm in from the edge (B).

3. Place a disk into a depression in the dapping block. Place a dapping punch that closely fits the size of the depression over the metal disk, and hammer it lightly with a rawhide mallet. Repeat with the other disks.

4. Using the 24-gauge silver wire, make twenty small jump rings (refer to lesson 5). I used a mandrel the width of a needle-file handle to make the size I needed (C).

5. Put two disks onto a jump ring, concave sides facing outward and away from each other (D). Solder the jump ring closed with easy solder. Loop another jump ring between these first two disks, and add two more disks to that second jump ring (concave sides facing outward). You can continue to solder each link if desired, but it’s not integral to the piece.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.